InCarTec Products > AUDIO SW CONTROL

Mercedes C, CLK, E-Class Audio 10 Steering wheel control interface (ISO CONNECTIONS)

29-UC-050-MB10
Price: £66.66 (£79.99 inc VAT)
PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Mercedes C (W203) CLK (W208) E (W210) Class vehicles with factory fitted Audio 10 systems.

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as ignition.

CANbus steering wheel control interface for Mercedes C (W203) CLK (W208) E (W210) Class vehicles with factory fitted Audio 10 systems.

The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume and track skip buttons.

The CANbus interface will also provide ignition, illumination, reverse gear, handbrake and speed pulse outputs.

This is an alternative to 39-MB-A10

Cars with original harman/kardon or BOSE amplified audio systems will require an additional interface to retain the audio with the original amplifier.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. if unsure please use our universal patch lead set

Radio Being Fitted
Part Number
Short Description

Resistive Programming (Loose Wire)

29-UCCAB-000Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos.
Alpine
29-UCCAB-001
Patch lead for 29-UC Series Steering wheel control for Alpine stereo.
Clarion/ JVC29-UCCAB-003
Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos.
Kenwood/ JVC (Single Wire)29-UCCAB-005
 Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos.
Pioneer/ Sony29-UCCAB-007
Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos.

Resistive Programming (3.5mm Jack)

29-UCCAB-016
3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos.
Universal29-UCCAB-SET

Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.


Brand: InCarTec

Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Mercedes - C-Class (2nd Gen) W203 (2000 - 2003)
Mercedes - S-Class (W220) (1998 - 2005 )
Mercedes - SL-Class (R230) (2002 - 2011)
Mercedes - Viano (W639) (2004 - 2014)
Mercedes - Vito 2nd Gen (W639) (2003 - 2014)

Browse our products by category

CARPLAY / ANDROID AUTO
Car radio stereos and head units
STEREO HEAD-UNIT FITTING - CAR SPECIFIC PARTS
STEREO HEAD-UNIT FITTING - UNIVERSAL PARTS
AERIALS & ANTENNA ADAPTERS
AUX, USB, RCA
BLUETOOTH KITS AND FITTING PARTS
CAR RADIO SPARES / OEM PARTS
SPEAKERS AND FITTING KITS
SPEAKER FITTING PARTS
AMPLIFIERS AND FITTING
Subwoofers
BLAM AUDIO
Recoil Audio
CAMERA INTEGRATION (Adding/Retaining)
Commercial, Van and Leisure
PARKING SENSORS
Dash Cams
WORKSHOP TRADE PARTS
Sale